Save 5% off orders over $250 or
10% off orders over $500
Hager 8318 Low Energy Auto Operator for Single Door Openings
For use on fire-rated and non-fire-rated openings
Exterior Doors: Yes (Interior side only)
Works on both out-swing or in-swing doors
Adjustable Opening Angle: Max Degree of Swing Powered -180 degrees (push), 140 (pull)
Opening Force: less than 15 lbs. Exceeds all ADA requirements
Closing Force: greater than 8 lbs
Must specify size. Available in 36 in., 42 in., 44 in., and 48 in. (Non-standard sizes available by special order)
Must specify PUSH or PULL side of door for mounting. Push side mounting w/ Standard Arm, Pull side mounting w/ Track Arm
Non-handed
Operates as a manual closer with or without power
Onboard power supply for accessories i.e. electric and magnetic locks, sensors, etc.
Built-in adjustable door stop for protection against wind or abusive environments
Blow open function for smoke ventilation (alarm contacts)
Equipped with cycle count
Factory setting for ANSI 156.19 speed requirements AND hold time delay
Night mode allows the exterior actuator to be deactivated by a rocker switch on the side of the operator
On/Off/Hold Open Switch as standard
Fire Alarm input shunts swing activations until FACP is manually reset
Memory is flash upgradeable
Includes appropriate door signage included with each operator
Easy installation using pre-drilled mounting holes
Operating Temperature: -4 degrees to 131 degrees F
Power Requirements: 115 VAC 60 HZ
Current Draw: 0.4 A to 1.2 A (Max)
Fuse Type: 3.15A fuse
Onboard Power Supply: 24 VDC 1 A
Electric Lock Relay: 5.0A at 28 VDC Form C SPDT
Programmable Boost on close - selectable power assist and additional force for the last 10 degrees of closing
Programmable Adjustable Opening Force Limitation
Programmable Adjustable Opening and Closing Speeds
Programmable Adjustable Hold Open Time for Door Activators
Maximum Door Width: 5 ft
Maximum Door Weight: 350 lbs
Push Arm Reveal: 9-3/4 in. (Reveals between 9-3/4 in. and 19 in. require arm extension, sold separately)
Pull Arm Reveal: 0 in.
Size of Operator: 5 in. h x 4-1/2 in. d x Length equals opening width plus 3 in.
Includes one (1) unit and single cover
Specify finish when ordering.
Meets ANSI A156.19
Complies with all U.S. and Canada ADA requirements for low energy operators
UL/cUL Listed for up to 3-hours
UL10C Listed for Positive Pressure Rating
UL325 Listed
The following part numbers are available by selecting the options above.
8318-ALM-PULL-368318-ALM-PULL-428318-ALM-PULL-448318-ALM-PULL-488318-ALM-PUSH-368318-ALM-PUSH-428318-ALM-PUSH-448318-ALM-PUSH-488318-DBZ-PULL-368318-DBZ-PULL-428318-DBZ-PULL-448318-DBZ-PULL-488318-DBZ-PUSH-368318-DBZ-PUSH-428318-DBZ-PUSH-448318-DBZ-PUSH-48
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.